The American Driver From Drivers...For Drivers |
National Weight & Size Provisions |
|
State/Provincial Weight & Size Limits |
|
|
(1) Overall length not specified if trailing units, including space between, do not exceed 68' and first semitrailer does not exceed 40'. |
(2) Two consecutive sets of tandem axles may carry a gross load of 34,000 lb. each if the overall distance between the first and last axle is 36' or more. An interstate Weight Permit is available that allows 34,000 lb. on each tandem axle if the overall length between tandems is 30' or more. Call 503-373-0000. |
(3) 60' overall on all Group 1 highways with maximum 53' trailer. No overall length limit on national Network highways with a maximum 53' trailer. |
(4) [1] 75' overall on Group 1 highways; first trailer in combination not to exceed 40'. [2] No overall length limit on Group 1 highways if the measurement from the front of the first trailer to the rear of the second trailer does not exceed 60' (including distance between trailers). [3] If distance from the front of the first trailer to the rear of the second trailer exceeds 60' (up to a maximum of 68') and overall length exceeds 75', see Route Map 7 for designated routes that allow no limit in overall length. |
(5) Allowed on Interstate and state-designated routes by permit only. |
(6) Route Map 7 can be obtained from the Oregon Department of Transportation or at Ports of Entry. |